BRAKE LINE KITS FOR YAMAHA
Complete DOT approved kits, including fittings and crush washers, available in braided stainless with clear-coat or traditional black
Our high quality DOT approved brake lines have exceptional strength and durability assuring riders of a product they can rely on and trust. Complete DOT approved kits, including fittings and crush washers, available in braided stainless with clear-coat or traditional black
- Product is not for an ABS models.
- All brake line kits are made to US-model specifications.
- Fitments are not guaranteed for non US models.
Here’s the proper way to measure for extended Cables & Brake lines:
First select and purchase your new bars, once in hand mount your new bars into the risers. Leave all of the stock cables and brake lines connected on the lower end. Now with the bars in position you will easily see and be able to measure how much additional cable length will be need.. Once determined you provide us with the measurements as follows
(Stock + or – added or subtracted length, an example +3″ would be 3″ longer then stock length)
We will then custom make you new cables in either black or stainless steel to your newly specified lengths. Wiring harness length should also be checked at this time.
Classic Stainless braid, Traditional Black
-1 Inch, -2 Inch, -3 Inch, -4 Inch, -5 Inch, -6 Inch, +10 Inch, +11 Inch, +12 Inch, +2 Inch, +3 Inch, +4 Inch, +5 Inch, +6 Inch, +7 Inch, +8 Inch, +9 Inch, Stock Length
1300 Stryker, Bolt C Spec, Bolt Standard & R Spec, RAIDER, ROAD STAR, Road Star Warrior, Roadliner / Stratoliner, Royal Star, V-STAR 1100 CLASSIC, V-STAR 1100 CUSTOM, V-STAR 1300, V-STAR 650 CLASSIC, V-STAR 650 CUSTOM, V-STAR 950
Spiegler Performance, SS CUSTOM CYCLE